|
|
|
WASHING MACHINE FOR JARS AFTER STERILIZATION,
2733110401
|
|
The machine is designed for washing and blowing off water from jars after their sterilization. It is made of stainless steel 1.4301 (AISI 304). The machine is pass-through tunnel washing machine and it consists of washing zone with nozzles and brushes for cleaning of the sides, the cap and the bottom of the jar and another zone for blowing off the water with air-knife nozzles. The washing agent is heated in the tank (equipped with filter), where pump brings it to the washing collectors. The machine is equipped with electrical heaters and a steam injector, which allows the operator to choose the type of heating (electrical, steam or combined). The desired water temperature can be adjusted between 30-60°C. The rinsing is performed with water from the general water supply, which is also used for refreshing and additional filling of the washing agent in the tank. The jars are transported through the zones by a motor driven chain (transport speed is smoothly adjustable). |
|
| Technical data: |
| Capacity |
4000 pcs./h |
| Max. dimensions of the product |
diameter 60-115 mm, height 250 mm |
| Power supply |
400 V/3 Ph/50 Hz
|
| Control voltage |
24 V DC
|
| Installed power |
14 kW |
Electrical heating
|
9 kW |
| Steam heating |
3 bar, 130°C |
| Drive |
0,37 kW |
| Pump |
4 kW/36 m³/h/3 bar |
|
|
Dimensions:
|
| Length |
4700 mm |
| Width |
1200 mm |
| Height |
1479 mm |
|
|
